These raw data have not been subjected to the National Ocean Service's quality control or quality assurance procedures and do not meet the criteria and standards of official National Ocean Service data. They are released for limited public use as preliminary data to be used only with appropriate caution.

cdm_data_type = TimeSeries
VARIABLES:
STATION_ID (REQUIRED 7-character Station ID surrounded in double quotes)
latitude (degrees_north)
longitude (degrees_east)
BEGIN_DATE (REQUIRED 8- to 14-character Begin Date (yyyymmdd hh:mi) surrounded in double quotes)
END_DATE (REQUIRED 8- to 14-character End Date (yyyymmdd hh:mi) surrounded in double quotes)
DCP (1-character DCP number surrounded in double quotes)
SENSOR_ID (2-character Sensor ID surrounded in double quotes)
time (The date time stamp, seconds since 1970-01-01T00:00:00Z)
AIR_GAP (vertical_navigation_clearance_above_waterway_surface, meters)
AIR_GAP_ADJ (vertical_navigation_clearance_above_waterway_surface, meters)
SIGMA (Standard deviation of samples used to compute the air gap, meters)
OUTLIER_FLAG (Inferred: A flag that indicates that the value is an outlier)
ROFC_FLAG (Inferred: A flag that indicates that rate of change was too high)
FLAT_FLAG (Inferred: A flag that indicates that the vaues did not change for some time)

NOAA NOS CO-OPS (Center for Operational Oceanographic Products and Services)


These raw data have not been subjected to the National Ocean Service's quality control or quality assurance procedures and do not meet the criteria and standards of official National Ocean Service data. They are released for limited public use as preliminary data to be used only with appropriate caution.

cdm_data_type = TimeSeries
VARIABLES:
STATION_ID (REQUIRED 7-character Station ID surrounded in double quotes)
latitude (degrees_north)
longitude (degrees_east)
BEGIN_DATE (REQUIRED 8- to 14-character Begin Date (yyyymmdd hh:mi) surrounded in double quotes)
END_DATE (REQUIRED 8- to 14-character End Date (yyyymmdd hh:mi) surrounded in double quotes)
time (The date time stamp, seconds since 1970-01-01T00:00:00Z)
ORIENTATION
NBEAMS (Number of Instrument Beams, 1)
NBINS (Number of depth/distance bins, 1)
BIN_SIZE (Bin Size in Meters, meters)
BIN_1_DIST (Bin 1 Distance, meters)
HEADING (degrees)
PITCH (degrees)
ROLL (degrees)
TEMP_C (Water Temperature in Celsius, degrees_Celsius)
DEPTH (Depth in meters, meters)
SYS_VOLT (System Voltage, volt)


These raw data have not been subjected to the National Ocean Service's quality control or quality assurance procedures and do not meet the criteria and standards of official National Ocean Service data. They are released for limited public use as preliminary data to be used only with appropriate caution.

cdm_data_type = TimeSeries
VARIABLES:
STATION_ID (REQUIRED 7-character Station ID surrounded in double quotes)
latitude (degrees_north)
longitude (degrees_east)
BEGIN_DATE (REQUIRED 8- to 14-character Begin Date (yyyymmdd hh:mi) surrounded in double quotes)
END_DATE (REQUIRED 8- to 14-character End Date (yyyymmdd hh:mi) surrounded in double quotes)
time (The date time stamp, seconds since 1970-01-01T00:00:00Z)
BIN (Bin number for the sample. These correspond to depth for vertically deployed instruments (up/down lookers) and distance from sensor for horizontally deployed instruments (sidelookers)), 1)
BIN_DEPTH_DIST (Bin depth or distance, meters)
SPEED (meters per second)
DIRECTION (degrees)
BEAM_ECHO_1 (Beam 1 echo intensity in counts, count)
BEAM_ECHO_2 (Beam 2 echo intensity in counts, count)
BEAM_ECHO_3 (Beam 3 echo intensity in counts, count)
BEAM_ECHO_4 (Beam 4 echo intensity in counts, count)


Meteorological & Ancillary - Air Temperature

These raw data have not been subjected to the National Ocean Service's quality control or quality assurance procedures and do not meet the criteria and standards of official National Ocean Service data. They are released for limited public use as preliminary data to be used only with appropriate caution.

cdm_data_type = TimeSeries
VARIABLES:
STATION_ID (REQUIRED 7-character Station ID surrounded in double quotes)
latitude (degrees_north)
longitude (degrees_east)
BEGIN_DATE (REQUIRED 8- to 14-character Begin Date (yyyymmdd hh:mi) surrounded in double quotes)
END_DATE (REQUIRED 8- to 14-character End Date (yyyymmdd hh:mi) surrounded in double quotes)
DCP (1-character DCP number surrounded in double quotes)
SENSOR_ID (2-character Sensor ID surrounded in double quotes: D1 - Air Temperature)
time (The date time stamp, seconds since 1970-01-01T00:00:00Z)
AirTemp (Air temperature, degrees Centigrade)
X (A flag that when set to 1 indicates that the maximum expected air temperature was exceeded)
N (A flag that when set to 1 indicates that the minimum expected air temperature was exceeded)
R (A flag that when set to 1 indicates that the rate of change tolerance limit was exceeded)


Meteorological & Ancillary - Barometric Pressure

These raw data have not been subjected to the National Ocean Service's quality control or quality assurance procedures and do not meet the criteria and standards of official National Ocean Service data. They are released for limited public use as preliminary data to be used only with appropriate caution.

cdm_data_type = TimeSeries
VARIABLES:
STATION_ID (REQUIRED 7-character Station ID surrounded in double quotes)
latitude (degrees_north)
longitude (degrees_east)
BEGIN_DATE (REQUIRED 8- to 14-character Begin Date (yyyymmdd hh:mi) surrounded in double quotes)
END_DATE (REQUIRED 8- to 14-character End Date (yyyymmdd hh:mi) surrounded in double quotes)
DCP (1-character DCP number surrounded in double quotes)
SENSOR_ID (2-character Sensor ID surrounded in double quotes: F1 - Barometric Pressure)
time (The date time stamp, seconds since 1970-01-01T00:00:00Z)
BP (Barometric pressure, millibars)
X (A flag that when set to 1 indicates that the maximum expected barometric pressure was exceeded)
N (A flag that when set to 1 indicates that the minimum expected barometric pressure was exceeded)
R (A flag that when set to 1 indicates that the rate of change tolerance limit was exceeded)


Meteorological & Ancillary - Conductivity

These raw data have not been subjected to the National Ocean Service's quality control or quality assurance procedures and do not meet the criteria and standards of official National Ocean Service data. They are released for limited public use as preliminary data to be used only with appropriate caution.

cdm_data_type = TimeSeries
VARIABLES:
STATION_ID (REQUIRED 7-character Station ID surrounded in double quotes)
latitude (degrees_north)
longitude (degrees_east)
BEGIN_DATE (REQUIRED 8- to 14-character Begin Date (yyyymmdd hh:mi) surrounded in double quotes)
END_DATE (REQUIRED 8- to 14-character End Date (yyyymmdd hh:mi) surrounded in double quotes)
DCP (1-character DCP number surrounded in double quotes)
SENSOR_ID (2-character Sensor ID surrounded in double quotes: G1 - Conductivity)
time (The date time stamp, seconds since 1970-01-01T00:00:00Z)
CONDUCTIVITY (Electrical Conductivity, mS/cm)
X (A flag that when set to 1 indicates that the maximum expected conductivity was exceeded)
N (A flag that when set to 1 indicates that the minimum expected conductivity was exceeded)
R (A flag that when set to 1 indicates that the rate of change tolerance limit was exceeded)


Meteorological & Ancillary - Relative Humidity

These raw data have not been subjected to the National Ocean Service's quality control or quality assurance procedures and do not meet the criteria and standards of official National Ocean Service data. They are released for limited public use as preliminary data to be used only with appropriate caution.

cdm_data_type = TimeSeries
VARIABLES:
STATION_ID (REQUIRED 7-character Station ID surrounded in double quotes)
latitude (degrees_north)
longitude (degrees_east)
BEGIN_DATE (REQUIRED 8- to 14-character Begin Date (yyyymmdd hh:mi) surrounded in double quotes)
END_DATE (REQUIRED 8- to 14-character End Date (yyyymmdd hh:mi) surrounded in double quotes)
DCP (1-character DCP number surrounded in double quotes)
SENSOR_ID (2-character Sensor ID surrounded in double quotes: O1 - Visibility)
time (The date time stamp, seconds since 1970-01-01T00:00:00Z)
REL_HUMIDITY (Relative Humidity, percent)
X (A flag that when set to 1 indicates that the maximum expected value was exceeded)
N (A flag that when set to 1 indicates that the minimum expected value was exceeded)
R (A flag that when set to 1 indicates that the rate of change tolerance limit was exceeded)


These raw data have not been subjected to the National Ocean Service's quality control or quality assurance procedures and do not meet the criteria and standards of official National Ocean Service data. They are released for limited public use as preliminary data to be used only with appropriate caution.

cdm_data_type = TimeSeries
VARIABLES:
STATION_ID (REQUIRED 7-character Station ID surrounded in double quotes)
latitude (degrees_north)
longitude (degrees_east)
BEGIN_DATE (REQUIRED 8- to 14-character Begin Date (yyyymmdd hh:mi) surrounded in double quotes)
END_DATE (REQUIRED 8- to 14-character End Date (yyyymmdd hh:mi) surrounded in double quotes)
DCP (1-character DCP number surrounded in double quotes)
SENSOR_ID (2-character Sensor ID surrounded in double quotes: O1 - Visibility)
time (The date time stamp, seconds since 1970-01-01T00:00:00Z)
VISIBILITY (meters)
X (A flag that when set to 1 indicates that the maximum expected visibility was exceeded)
N (A flag that when set to 1 indicates that the minimum expected visibility was exceeded)
R (A flag that when set to 1 indicates that the rate of change tolerance limit was exceeded)


Meteorological & Ancillary - Water Temperature

These raw data have not been subjected to the National Ocean Service's quality control or quality assurance procedures and do not meet the criteria and standards of official National Ocean Service data. They are released for limited public use as preliminary data to be used only with appropriate caution.

cdm_data_type = TimeSeries
VARIABLES:
STATION_ID (REQUIRED 7-character Station ID surrounded in double quotes)
latitude (degrees_north)
longitude (degrees_east)
BEGIN_DATE (REQUIRED 8- to 14-character Begin Date (yyyymmdd hh:mi) surrounded in double quotes)
END_DATE (REQUIRED 8- to 14-character End Date (yyyymmdd hh:mi) surrounded in double quotes)
DCP (1-character DCP number surrounded in double quotes)
SENSOR_ID (2-character Sensor ID surrounded in double quotes: E1 - Water Temperature)
time (The date time stamp, seconds since 1970-01-01T00:00:00Z)
WaterTemp (Water temperature, degrees Centigrade)
X (A flag that when set to 1 indicates that the maximum expected water temperature was exceeded)
N (A flag that when set to 1 indicates that the minimum expected water temperature was exceeded)
R (A flag that when set to 1 indicates that the rate of change tolerance limit was exceeded)


These raw data have not been subjected to the National Ocean Service's quality control or quality assurance procedures and do not meet the criteria and standards of official National Ocean Service data. They are released for limited public use as preliminary data to be used only with appropriate caution.

cdm_data_type = TimeSeries
VARIABLES:
STATION_ID (REQUIRED 7-character Station ID surrounded in double quotes)
latitude (degrees_north)
longitude (degrees_east)
BEGIN_DATE (REQUIRED 8- to 14-character Begin Date (yyyymmdd hh:mi) surrounded in double quotes)
END_DATE (REQUIRED 8- to 14-character End Date (yyyymmdd hh:mi) surrounded in double quotes)
DCP (1-character DCP number surrounded in double quotes)
SENSOR_ID (2-character Sensor ID surrounded in double quotes: C1 - Wind)
time (The date time stamp, seconds since 1970-01-01T00:00:00Z)
Wind_Speed (meters per second)
Wind_Direction (degrees)
Wind_Gust (meters per second)
X (A flag that when set to 1 indicates that the maximum wind speed was exceeded)
R (A flag that when set to 1 indicates that the rate of change tolerance limit was exceeded)


These raw data have not been subjected to the National Ocean Service's quality control or quality assurance procedures and do not meet the criteria and standards of official National Ocean Service data. They are released for limited public use as preliminary data to be used only with appropriate caution.

cdm_data_type = TimeSeries
VARIABLES:
STATION_ID (REQUIRED 7-character Station ID surrounded in double quotes)
latitude (degrees_north)
longitude (degrees_east)
DATUM (REQUIRED 3- to 4-character Datum surrounded in double quotes: MHHW, MHW, MTL, MSL, MLW, MLLW, STND, NAVD or IGLD)
BEGIN_DATE (REQUIRED 8- to 14-character Begin Date (yyyymmdd hh:mi) surrounded in double quotes)
END_DATE (REQUIRED 8- to 14-character End Date (yyyymmdd hh:mi) surrounded in double quotes)
DCP (1-character DCP number surrounded in double quotes)
SENSOR_ID (2-character Sensor ID surrounded in double quotes)
time (The date time stamp, seconds since 1970-01-01T00:00:00Z)
WL_VALUE (Water level value, meters)


These raw data have not been subjected to the National Ocean Service's quality control or quality assurance procedures and do not meet the criteria and standards of official National Ocean Service data. They are released for limited public use as preliminary data to be used only with appropriate caution.

cdm_data_type = TimeSeries
VARIABLES:
STATION_ID (REQUIRED 7-character Station ID surrounded in double quotes)
latitude (degrees_north)
longitude (degrees_east)
DATUM (REQUIRED 3- to 4-character Datum surrounded in double quotes: MHHW, MHW, MTL, MSL, MLW, MLLW, STND, NAVD or IGLD)
BEGIN_DATE (REQUIRED 8- to 14-character Begin Date (yyyymmdd hh:mi) surrounded in double quotes)
END_DATE (REQUIRED 8- to 14-character End Date (yyyymmdd hh:mi) surrounded in double quotes)
DCP (1-character DCP number surrounded in double quotes)
SENSOR_ID (2-character Sensor ID surrounded in double quotes)
time (The date time stamp, seconds since 1970-01-01T00:00:00Z)
WL_VALUE (Water level value, meters)
SIGMA (Standard deviation of 1 second samples used to compute the water level height, meters)
O (Outliers: Count of number of samples that fall outside a 3-sigma band about the mean, count)
F (A flag that when set to 1 indicates that the flat tolerance limit was exceeded)
R (A flag that when set to 1 indicates that the rate of change tolerance limit was exceeded)
L (A flag that when set to 1 indicates that either the maximum or minimum expected water level height limit was exceeded)


These raw data have not been subjected to the National Ocean Service's quality control or quality assurance procedures and do not meet the criteria and standards of official National Ocean Service data. They are released for limited public use as preliminary data to be used only with appropriate caution.

cdm_data_type = TimeSeries
VARIABLES:
STATION_ID (REQUIRED 7-character Station ID surrounded in double quotes)
latitude (degrees_north)
longitude (degrees_east)
DATUM (REQUIRED 4-character Datum surrounded in double quotes: IGLD)
BEGIN_DATE (REQUIRED 8- to 14-character Begin Date (yyyymmdd hh:mi) surrounded in double quotes)
END_DATE (REQUIRED 8- to 14-character End Date (yyyymmdd hh:mi) surrounded in double quotes)
time (The date time stamp, seconds since 1970-01-01T00:00:00Z)
MEAN (Mean hourly data over a 24 hour period, meters)
I (Inferred: A flag that indicates that the water level value has been inferred)
L (Limit: A flag that when set to 1 indicates that either the maximum or minimum expected water level height limit was exceeded)

NOAA NOS CO-OPS (Center for Operational Oceanographic Products and Services)


These raw data have not been subjected to the National Ocean Service's quality control or quality assurance procedures and do not meet the criteria and standards of official National Ocean Service data. They are released for limited public use as preliminary data to be used only with appropriate caution.

cdm_data_type = TimeSeries
VARIABLES:
STATION_ID (REQUIRED 7-character Station ID surrounded in double quotes)
latitude (degrees_north)
longitude (degrees_east)
DATUM (REQUIRED 3- to 4-character Datum surrounded in double quotes: MHHW, MHW, MTL, MSL, MLW, MLLW, STND, NAVD or IGLD)
BEGIN_DATE (REQUIRED 8- to 14-character Begin Date (yyyymmdd hh:mi) surrounded in double quotes)
END_DATE (REQUIRED 8- to 14-character End Date (yyyymmdd hh:mi) surrounded in double quotes)
time (The date time stamp, seconds since 1970-01-01T00:00:00Z)
WL_VALUE (Water level value, meters)
TY (Designation of Water level height. Must be surrounded in double quotes:  LL = lower low water, L = low water, H = High water, HH Higher High water.)
I (Inferred: A flag that indicates that the water level value has been inferred)
L (Limit: A flag that when set to 1 indicates that either the maximum or minimum expected water level height limit was exceeded)


These raw data have not been subjected to the National Ocean Service's quality control or quality assurance procedures and do not meet the criteria and standards of official National Ocean Service data. They are released for limited public use as preliminary data to be used only with appropriate caution.

cdm_data_type = TimeSeries
VARIABLES:
STATION_ID (REQUIRED 7-character Station ID surrounded in double quotes)
latitude (degrees_north)
longitude (degrees_east)
DATUM (REQUIRED 3- to 4-character Datum surrounded in double quotes: MHHW, MHW, MTL, MSL, MLW, MLLW, STND, NAVD or IGLD)
BEGIN_DATE (REQUIRED 8- to 14-character Begin Date (yyyymmdd hh:mi) surrounded in double quotes)
END_DATE (REQUIRED 8- to 14-character End Date (yyyymmdd hh:mi) surrounded in double quotes)
time (The date time stamp, seconds since 1970-01-01T00:00:00Z)
WL_VALUE (Water level value, meters)
SIGMA (Standard deviation of 1 second samples used to compute the water level height, meters)
I (Inferred: A flag that indicates that the water level value has been inferred)
L (Limit: A flag that when set to 1 indicates that either the maximum or minimum expected water level height limit was exceeded)


These raw data have not been subjected to the National Ocean Service's quality control or quality assurance procedures and do not meet the criteria and standards of official National Ocean Service data. They are released for limited public use as preliminary data to be used only with appropriate caution.

cdm_data_type = TimeSeries
VARIABLES:
STATION_ID (REQUIRED 7-character Station ID surrounded in double quotes)
latitude (degrees_north)
longitude (degrees_east)
DATUM (REQUIRED 4-character Datum surrounded in double quotes: IGLD)
BEGIN_DATE (REQUIRED 8- to 14-character Begin Date (yyyymmdd hh:mi) surrounded in double quotes)
END_DATE (REQUIRED 8- to 14-character End Date (yyyymmdd hh:mi) surrounded in double quotes)
time (The date time stamp, seconds since 1970-01-01T00:00:00Z)
HIGHEST (Highest data over period of one month, meters)
MHHW (Mean data over period of one month, meters)
MHW (Mean data over period of one month, meters)
MSL (Mean data over period of one month, meters)
MTL (Mean data over period of one month, meters)
MLW (Mean data over period of one month, meters)
MLLW (Mean data over period of one month, meters)
LOWEST (Lowest data over period of one month, meters)


These raw data have not been subjected to the National Ocean Service's quality control or quality assurance procedures and do not meet the criteria and standards of official National Ocean Service data. They are released for limited public use as preliminary data to be used only with appropriate caution.

cdm_data_type = TimeSeries
VARIABLES:
STATION_ID (REQUIRED 7-character Station ID surrounded in double quotes)
latitude (degrees_north)
longitude (degrees_east)
DATUM (REQUIRED 3- to 4-character Datum surrounded in double quotes: MHHW, MHW, MTL, MSL, MLW, MLLW, STND, NAVD or IGLD)
BEGIN_DATE (REQUIRED 8- to 14-character Begin Date (yyyymmdd hh:mi) surrounded in double quotes)
END_DATE (REQUIRED 8- to 14-character End Date (yyyymmdd hh:mi) surrounded in double quotes)
time (The date time stamp, seconds since 1970-01-01T00:00:00Z)
WL_VALUE (Water level value, meters)
SIGMA (Standard deviation of 1 second samples used to compute the water level height, meters)
I (Inferred: A flag that indicates that the water level value has been inferred)
F (A flag that when set to 1 indicates that the flat tolerance limit was exceeded)
R (A flag that when set to 1 indicates that the rate of change tolerance limit was exceeded)
T (A flag that when set to 1 indicates that the temperature difference tolerance limit was exceeded)